Downtown Los Angeles skyline under a clear blue sky

Los Angeles, CA

Mold Inspection & Testing in Los Angeles, CA

Independent mold inspection and testing for Los Angeles property managers, facility teams and building owners, with a written report you can hand to a contractor, a tenant or an insurer.

Photo: Sam Szuchan / Unsplash

What we do

Citadel EHS investigates suspected mold in Los Angeles buildings by finding the water first. A consultant asks about the building’s leak and repair history, walks the space with a moisture meter and an infrared camera, and samples only where a result will change a decision.

We do not sell remediation or repairs. The report says what is wet, why and how far it extends, so it can scope the repair or document conditions for a lease, a sale, an insurer or a tenant dispute.

Mold testing here means air and surface sampling, read by our industrial hygiene staff alongside the moisture findings. Our Glendale headquarters leads Los Angeles work, and the Valencia and Long Beach offices cover the Santa Clarita Valley and the South Bay.

Mold in Los Angeles buildings

Los Angeles is dry for much of the year, so mold here usually traces to a specific failure rather than constant damp. The California Department of Public Health lists the usual sources: plumbing leaks, leaky roofs, sink and sewer overflows, damp basements and crawl spaces, and steam from showers and cooking.

In multi-story apartment, office and hospital buildings, one failure can wet several units or suites below it before anyone sees a stain. We trace the water path through shared walls and ceiling cavities, not only the room where the problem was reported.

For rental housing, California law adds a reason to document conditions early. Visible mold can make a dwelling substandard, as covered below.

What the rules say about mold testing in California

Mold is not regulated the way asbestos is. These are the points that shape how we plan sampling in Los Angeles.

  • No federal mold limits

    EPA states that no EPA or other federal limits have been set for mold or mold spores, so sampling cannot be used to check a building’s compliance with a federal mold standard.

    EPA, A Brief Guide to Mold, Moisture and Your Home
  • Toxic Mold Protection Act (H&S Code 26100 et seq.)

    The 2001 Act directed the state health department to consider whether health-based permissible exposure limits for indoor mold were feasible. CDPH reports that it answered in 2005 that the evidence did not support setting them, and that this remains its position.

    CDPH, Mold and Dampness
  • Health & Safety Code 17920.3(a)(13)

    Visible mold growth, as determined by a health officer or code enforcement officer, is one of the conditions that can make a building substandard when it endangers occupants. The statute excludes minor mold on surfaces that can accumulate moisture as part of their intended use.

    California Health & Safety Code 17920.3

How an inspection works

  1. Step 1

    Intake call

    You tell us what happened, where the water has been and how the space is used. We tell you whether sampling is likely to help or whether the water source is the real question.

  2. Step 2

    Site visit

    A consultant checks suspect materials with moisture readings and uses infrared imaging to find wet areas behind finishes, including in adjoining units or suites.

  3. Step 3

    Sampling plan

    If sampling will answer a real question, we choose locations and methods, including comparison samples from outdoors or an unaffected area.

  4. Step 4

    Laboratory analysis

    Samples go to a laboratory and the results come back to us for review.

  5. Step 5

    Written report

    We send findings, laboratory results and recommended next steps. If repairs follow, the report is the starting point for the scope.

You receive a written report with our findings, the laboratory results and recommendations, written by an independent consultant who is not bidding on the repair.

Mold Inspection & Testing in Los Angeles: common questions

Can a mold test tell me whether my Los Angeles building is safe?
Not on its own. EPA says there are no federal limits for mold, and CDPH says the evidence did not support setting state exposure limits. We read results against outdoor and unaffected-area samples and the building’s moisture condition.
Do I need to test if I can already see mold?
Often not. EPA says that in most cases, if visible mold growth is present, sampling is unnecessary. For a rental unit, California’s substandard-housing test turns on visible mold as determined by a health officer or code enforcement officer.
A leak started in the unit above. Can you check the others?
Yes. We trace the water path with moisture readings and infrared imaging and report which units, walls and ceiling cavities are wet. Adjoining units can be part of the same visit.
Do you work in occupied hospitals and campuses?
Yes. Our projects list includes moisture and microbial work at Harbor-UCLA Medical Center and Valley Presbyterian Hospital, both active healthcare campuses.
Do you cover areas outside the city of Los Angeles?
Yes. Glendale serves Burbank, Pasadena, Hollywood, Beverly Hills, Santa Monica, Culver City and the San Fernando Valley. Our Valencia office covers the Santa Clarita Valley and our Long Beach office the South Bay.
Do you do the cleanup?
No. We are an independent consultant and do not perform remediation labor. Our Los Angeles mold remediation page explains how we write the protocol and verify the result.

Request a consultation

Mold Inspection & Testing in Los Angeles, CA

By submitting, you'll also receive our newsletter. You can unsubscribe at any time.

Inquiring about Mold Inspection & Testing in Los Angeles