
Seattle, WA
Mold Inspection & Testing in Seattle, WA
Independent mold inspection and testing from our Ballard office for Seattle property managers, employers and building owners.
What we do
Citadel EHS sends a consultant to find out where the moisture is and whether mold is growing in it. We map wet materials with infrared imaging and moisture readings, look in the places occupants cannot see, and take air or surface samples when they will help answer a question.
We investigate water intrusion, plumbing leaks, sewage spills and persistent humidity problems. Because we do not do the repair work, the report is not written to win a bid.
Our industrial hygienists review the laboratory results with the moisture findings. A spore count on its own says little. The pattern across locations, and how it compares with outdoors, says more.
Mold in Seattle buildings
The Puget Sound has a marine climate with a long wet season, so rain is working on a building envelope for much of the year. In wood-framed buildings, a failed flashing, window detail or roof edge can let water in for a long time before anyone sees a stain.
Seattle also has a lot of multifamily and mixed-use property. In an occupied building, a leak in one unit can wet a wall or ceiling cavity in another, and tenants, owners and managers often need a neutral account of what happened.
For property managers of residential buildings, Washington law adds a specific duty on mold information, covered below.
What the rules say about mold
Mold exposure is not regulated with numeric limits. These are the points that apply to a Seattle building.
No federal mold limits
EPA states that no EPA or other federal limits have been set for mold or mold spores, so sampling cannot show compliance with a federal mold standard.
EPA, A Brief Guide to Mold, Moisture and Your HomeRCW 59.18.060(14)
Landlords of residential dwellings must give new tenants, at lease signing, information provided or approved by the Washington Department of Health about the health hazards of indoor mold. It can be given to each tenant in writing or posted in a visible public location at the property.
Washington RCW 59.18.060Washington Department of Health
The Department of Health says that fixing leaks is generally the landlord’s responsibility and reducing condensation is generally the renter’s responsibility, and that you often do not need to sample because mold can usually be seen or smelled.
Washington Department of Health, Mold
How an inspection works
Step 1
Intake call
You tell us what was seen or smelled, where there have been leaks and who occupies the space. We tell you whether sampling is likely to help.
Step 2
Site visit
We inspect the affected areas and use moisture readings and infrared imaging to find wet materials that are not visible.
Step 3
Targeted sampling
Where sampling will answer a question, we choose air or surface methods and take comparison samples outdoors or in an unaffected space.
Step 4
Laboratory analysis
Samples go to a laboratory and the results come back to us for review.
Step 5
Written report
We deliver a report with findings, laboratory results and recommendations, including the moisture source and what the repair has to address.
You receive a written report with our findings, the laboratory results and recommended next steps, from a consultant who is not bidding on the repair.
On the ground
Our Seattle office
1455 NW Leary Way Suite 400
Seattle, WA 98107
(818) 246-2707
Mold Inspection & Testing in Seattle: common questions
- As a Seattle landlord, what do I have to tell tenants about mold?
- RCW 59.18.060(14) requires residential landlords to give new tenants the Department of Health’s mold information when the lease is signed, or to post it in a visible public location at the property. Read the statute for the full text. Our inspections address the moisture conditions, not the legal paperwork.
- Who is responsible for a leak that led to mold, the landlord or the tenant?
- The Department of Health says fixing leaks is generally the landlord’s responsibility and reducing condensation is generally the renter’s. We are not lawyers, but an independent report that identifies the source helps everyone work from the same facts.
- Is there a Washington or federal limit for mold spores?
- EPA says no federal limits have been set for mold or mold spores. We therefore compare affected and unaffected areas and outdoor samples, and read the result alongside the moisture findings.
- Can you investigate a leak in one unit that may have affected others?
- Yes. We trace the water path with moisture readings and infrared imaging and report which areas are wet. We can inspect adjoining units and shared cavities as part of the same visit.
- Do you do the cleanup?
- No. We are an independent consultant and do not perform remediation labor. If cleanup is needed, our Seattle mold remediation page explains how we write the protocol and verify the result.
- Do you serve areas outside Seattle?
- Yes. Our Seattle office serves Bellevue, Redmond, Kirkland, Bothell, Renton, Kent, Tacoma, Everett and Olympia, and King, Pierce and Snohomish counties.