
Portland, OR
Mold Inspection & Testing in Portland, OR
Independent mold inspection and testing for Portland property managers, facility teams and building owners, with a written report you can hand to a contractor or an insurer.
What we do
Citadel EHS investigates suspected mold from the water source outward. A consultant walks the space, asks about the building’s leak and repair history, maps wet materials with infrared imaging and moisture readings, and takes samples only where they answer a specific question.
We do not sell remediation, so the findings are not tied to a repair bid. The report describes what is wet, why, and how far it goes, and it can be used to scope the repair or to document conditions for a lease, a sale or a claim.
Mold testing here means air and surface sampling, reviewed by our industrial hygiene staff. A lab result is one input. It is read alongside the moisture findings and the building’s history, not on its own.
Mold in Portland buildings
Western Oregon has a long wet season, and buildings stay damp for months at a time. The common starting points are roof and window leaks, plumbing failures, moisture in crawlspaces and basements, and condensation on cold surfaces. Portland has plenty of older buildings with crawlspaces and below-grade space, which is where slow, hidden moisture tends to sit.
The Oregon Health Authority describes the same causes: leaks in roofs, gutters, foundations and plumbing, and condensation on cold surfaces such as single-pane windows and uninsulated walls. Finding and fixing the water is the part that decides whether mold comes back.
What the rules say about mold testing
Mold is not regulated the way asbestos is. These are the points that shape how we plan sampling in Oregon.
No federal mold limits
EPA states that no EPA or other federal limits have been set for mold or mold spores, so sampling cannot be used to check a building’s compliance with a federal mold standard.
EPA, A Brief Guide to Mold, Moisture and Your HomeOregon Health Authority guidance
The Oregon Health Authority says there are no standards to judge “safe” levels of indoor mold, so a test cannot tell you whether the amount detected will harm your health.
Oregon Health Authority, MoldSampling after cleanup
EPA notes that surface sampling may be useful to determine whether an area has been adequately cleaned or remediated, and that it should be designed by professionals with mold sampling experience.
EPA, A Brief Guide to Mold, Moisture and Your Home
How an inspection works
Step 1
Intake call
You tell us what happened, where the water has been and what the building is used for. We tell you whether sampling is likely to be useful or whether the moisture source is the real question.
Step 2
Site visit
A consultant inspects the affected areas, checks suspect materials with moisture readings and uses infrared imaging to find wet areas behind finishes.
Step 3
Sampling plan
If sampling will answer a real question, we choose the locations and methods, including comparison samples from outdoors or an unaffected area.
Step 4
Laboratory analysis
Samples go to a laboratory and the results come back to us for review.
Step 5
Written report
We send a report with our findings, the laboratory results and recommended next steps. If repairs or remediation follow, the report is the starting point for the scope.
You receive a written report with our findings, the laboratory results and recommendations. It is written by an independent consultant who is not bidding on the repair.
On the ground
Our Portland office
1120 SE Madison Street
Portland, OR 97214
(818) 246-2707
Based in Portland
Who you will work with
Mold Inspection & Testing in Portland: common questions
- Do I need a mold test if I can already see mold?
- Often not. EPA says that in most cases, if visible mold growth is present, sampling is unnecessary. The more useful questions are how far the moisture has spread and what is causing it, and an inspection answers those.
- Is there an Oregon limit for mold in a building?
- The Oregon Health Authority says there are no standards to judge “safe” levels of indoor mold, and EPA says there are no federal limits. That is why we interpret results against outdoor and unaffected-area samples and the building’s moisture condition.
- Which parts of a Portland building do you usually check?
- We start where the water came from: roofs, windows and wall penetrations, plumbing, and crawlspaces or basements. Hidden moisture in older buildings is common, which is why we map wet materials before deciding where to sample.
- Does the report tell us who should do the cleanup?
- It tells you what the work needs to cover. We do not perform the removal ourselves, which keeps the findings independent. If the work is large enough to need a protocol and clearance testing, see our Portland mold remediation page.
- Who usually hires you for this?
- Property managers, facility and EHS managers and building owners, including owners of residential buildings. An independent report is useful when more than one party needs to rely on it.
- Do you work outside the city of Portland?
- Yes. Our Portland office serves Beaverton, Hillsboro, Tigard, Lake Oswego, Gresham, Vancouver (WA), Salem and Eugene, along with Multnomah, Washington and Clackamas counties.