Seattle skyline with the Space Needle in the foreground

Washington

Asbestos Testing & Surveys in Washington State

Asbestos testing and building surveys for Washington owners and managers, with a clear view of which state and regional rules apply to your project.

Photo: Evan Clark / Unsplash

What we do

Citadel EHS surveys buildings for asbestos-containing materials before renovation, repair or demolition. We inspect, collect bulk samples, send them to a laboratory and report what is there, where and in what condition.

Our building sciences group can go on to design the abatement, prepare bid documents, oversee the abatement contractor and perform air monitoring and clearance. We do not perform the abatement.

Washington projects involve a state layer and a regional layer. This page covers both and says which agency to ask about your county.

How Washington’s asbestos rules fit together

Two things apply everywhere in the state. State law puts an inspection duty on the owner or the owner’s agent before a project that could disturb asbestos, and the Department of Labor & Industries sets notification and contractor-certification requirements.

The rules on surveys and notification for demolition and renovation vary by region, because local clean air agencies write them. The Puget Sound Clean Air Agency covers King, Kitsap, Pierce and Snohomish counties. Other agencies, such as Spokane Clean Air and the Southwest Clean Air Agency, publish their own asbestos rules for their areas.

In practice the three questions are the same everywhere: who inspects, who is notified and who may do the removal. The answers differ by agency, so we confirm the agency first.

State and regional requirements

Statewide rules come first, followed by examples from three regional agencies. Each links to its source. Check the agency for your county before you plan.

  • RCW 49.26.013

    An owner or owner’s agent who allows a project with a reasonable possibility of disturbing asbestos must have a good faith inspection performed by persons meeting federal accreditation requirements, unless the owner assumes asbestos is present and takes maximum precautions. The written report or assumption statement must be given to all contractors before they apply or bid.

    Washington RCW 49.26.013
  • WAC 296-65-020

    Before an asbestos project involving more than 48 square feet or 10 linear feet of asbestos-containing material begins, notification must be given to the Department of Labor & Industries.

    Washington WAC 296-65-020
  • RCW 49.26.115

    A contractor that performs an asbestos abatement project must hold a contractor’s certificate.

    Washington RCW 49.26.115
  • Puget Sound Clean Air Agency

    The agency’s jurisdiction covers King, Kitsap, Pierce and Snohomish counties.

    Puget Sound Clean Air Agency, About Us
  • PSCAA Regulation III, Section 4.02

    A demolition or renovation may not be caused or allowed unless the owner or owner’s agent obtains an asbestos survey by an AHERA building inspector. A renovation of an owner-occupied single-family residence does not need an AHERA inspector.

    Puget Sound Clean Air Agency, Regulating Asbestos
  • Spokane Clean Air

    An asbestos survey by an AHERA-certified building inspector is required before renovation or demolition, and a copy must be posted at the work site. Owner-occupants remodeling their own single-family home are advised, not required, to have one. A notice of intent is required for renovations of 10 or more linear feet or 48 or more square feet of asbestos per structure per calendar year, and at least 10 days before a demolition.

    Spokane Clean Air, Renovation & Demolition Projects
  • SWCAA 476-040

    In the Southwest Clean Air Agency’s area, the owner must obtain an asbestos inspection by an AHERA accredited building inspector before a demolition. Before a renovation, the owner must determine whether suspect asbestos-containing materials are in the work area and either treat them as presumed asbestos or have an AHERA accredited building inspector inspect them.

    Southwest Clean Air Agency, SWCAA 476

How a survey works

  1. Step 1

    Scope and agency

    You tell us the building, its location and the planned work. We confirm which clean air agency and which exemptions apply.

  2. Step 2

    Inspection

    An accredited inspector walks the planned work area and lists suspect materials by type.

  3. Step 3

    Sampling

    We collect bulk samples of each suspect material and record where each was taken and its condition.

  4. Step 4

    Laboratory analysis

    Samples go to a laboratory for asbestos analysis, and results come back to us.

  5. Step 5

    Survey report

    We deliver a report with materials sampled, results, quantities, condition and recommended response actions, ready to give to bidding contractors.

You receive a written survey report with laboratory results and recommendations, ready to give to every bidding contractor.

Asbestos Testing in Washington: common questions

Do I need an asbestos survey before renovating in Washington?
State law requires the owner or owner’s agent to have a good faith inspection performed unless the owner assumes asbestos is present and takes maximum precautions. Regional agencies add their own survey rules. Which one applies depends on the county.
Which agency regulates asbestos where I am?
In King, Kitsap, Pierce and Snohomish counties it is the Puget Sound Clean Air Agency. Spokane Clean Air and the Southwest Clean Air Agency set rules for their areas. Tell us the property address and we will confirm.
Who must be notified before a project starts?
Notification to the Department of Labor & Industries is required before an asbestos project involving more than 48 square feet or 10 linear feet of material. The regional agency has its own notice for demolition or abatement.
Can I assume asbestos is present and skip the survey?
State law allows an owner to skip the inspection by assuming asbestos is present and taking maximum precautions. Some regional rules also let you treat suspect material as presumed asbestos. Confirm that your agency’s rule allows it for your project.
Who does the abatement?
A contractor holding a Washington asbestos contractor’s certificate. We do not perform abatement, but we can design the project, review bids, oversee the work and perform clearance air monitoring.
Where can I read about Seattle in particular?
Our Seattle asbestos testing page covers the Puget Sound Clean Air Agency rules in more detail, including demolition notification and the summary that must be posted at the work site.

Request a consultation

Asbestos Testing in Washington

By submitting, you'll also receive our newsletter. You can unsubscribe at any time.

Inquiring about Asbestos Testing in Washington