Seattle skyline with the Space Needle in the foreground

Washington

Mold Inspection & Testing in Washington State

Independent mold inspection and testing for Washington property managers, employers and building owners, with a written report you can hand to a contractor or an insurer.

Photo: Evan Clark / Unsplash

What we do

Citadel EHS sends a consultant to find out where the moisture is and whether mold is growing in it. We map wet materials with infrared imaging and moisture readings, look in places occupants cannot see, and take air or surface samples when they will answer a question.

We investigate water intrusion, plumbing leaks, sewage spills and persistent humidity problems. Because we do not do the repair work, the report is not written to win a bid.

Our industrial hygienists review the laboratory results with the moisture findings. A spore count on its own says little. The pattern across locations, and how it compares with outdoors, says more.

What applies across Washington

Washington does not set numeric mold limits, and neither does the federal government. The state Department of Health publishes guidance that applies everywhere, and one statute, RCW 59.18.060(14), puts a mold-information duty on residential landlords statewide.

The Department of Health says that fixing leaks is generally the landlord’s responsibility and reducing condensation is generally the renter’s, and that you often do not need to sample because mold can usually be seen or smelled. That shapes our approach: we start with the water, and sample when the answer matters.

Moisture conditions vary by region. West of the Cascades, a marine climate with a long wet season works on building envelopes for much of the year, and in wood-framed buildings a failed flashing or window detail can let water in for a long time before anyone sees a stain. We apply the same moisture-first method in every part of the state.

Our Seattle office in Ballard serves King, Pierce and Snohomish counties, including Bellevue, Tacoma, Everett and Olympia. Our Portland office serves Vancouver. For a project elsewhere in Washington, call the Seattle office and we will scope it with you.

What the rules say about mold in Washington

Mold exposure is not regulated with numeric limits. These are the points that apply anywhere in the state.

  • No federal mold limits

    EPA states that no EPA or other federal limits have been set for mold or mold spores, so sampling cannot show compliance with a federal mold standard.

    EPA, A Brief Guide to Mold, Moisture and Your Home
  • RCW 59.18.060(14)

    Landlords of residential dwellings must give new tenants, at lease signing, information provided or approved by the Washington Department of Health about the health hazards of indoor mold. It can be given to each tenant in writing or posted in a visible public location at the property.

    Washington RCW 59.18.060
  • Washington Department of Health

    The Department of Health says that fixing leaks is generally the landlord’s responsibility and reducing condensation is generally the renter’s responsibility, and that you often do not need to sample because mold can usually be seen or smelled.

    Washington Department of Health, Mold

How an inspection works

  1. Step 1

    Intake call

    You tell us what was seen or smelled, where there have been leaks and who occupies the space. We tell you whether sampling is likely to help.

  2. Step 2

    Site visit

    We inspect the affected areas and use moisture readings and infrared imaging to find wet materials that are not visible.

  3. Step 3

    Targeted sampling

    Where sampling will answer a question, we choose air or surface methods and take comparison samples outdoors or in an unaffected space.

  4. Step 4

    Laboratory analysis

    Samples go to a laboratory and the results come back to us for review.

  5. Step 5

    Written report

    We deliver a report with findings, laboratory results and recommendations, including the moisture source and what the repair has to address.

You receive a written report with our findings, the laboratory results and recommended next steps, from a consultant who is not bidding on the repair.

Mold Inspection & Testing in Washington: common questions

What must a Washington landlord tell tenants about mold?
RCW 59.18.060(14) requires residential landlords to give new tenants the Department of Health’s mold information when the lease is signed, or to post it in a visible public location at the property. Read the statute for the full text. Our inspections address the moisture conditions, not the legal paperwork.
Who is responsible for a leak that led to mold, the landlord or the tenant?
The Department of Health says fixing leaks is generally the landlord’s responsibility and reducing condensation is generally the renter’s. We are not lawyers, but an independent report that identifies the source helps everyone work from the same facts.
Is there a Washington or federal limit for mold spores?
EPA says no federal limits have been set for mold or mold spores. We therefore compare affected and unaffected areas and outdoor samples, and read the result alongside the moisture findings.
Do the mold rules differ between Seattle and Spokane?
The state guidance and RCW 59.18.060(14) apply in both. Regional agencies matter for asbestos if repairs involve tear-out, which is why our Washington asbestos page covers them.
Do you do the cleanup?
No. We are an independent consultant and do not perform remediation labor. If cleanup is needed, our Washington mold remediation page explains how we write the protocol and verify the result.
Where in Washington do you work?
Our Seattle office serves Bellevue, Redmond, Kirkland, Bothell, Renton, Kent, Tacoma, Everett and Olympia, and King, Pierce and Snohomish counties. Our Portland office serves Vancouver. Call us about other locations.

Request a consultation

Mold Inspection & Testing in Washington

By submitting, you'll also receive our newsletter. You can unsubscribe at any time.

Inquiring about Mold Inspection & Testing in Washington